Cool-Pak HP

Standard Features

• Shipped ready for top supply and front return (with optional ducted return)
• Insulated compartment to improve cooling performance, reduce noise, and prevent sweating
• ECM indoor blower & outdoor fan motor to provide precise airflow selection and improve system efficiency
• High efficiency single stage scroll and rotary compressors with double isolated compressor mount to reduce
compressor noise and vibration. (Two Stage Scroll available for reduced cabinet size 2-ton unit.)
• Larger evaporator coil with low face velocity for improved cooling performance
• Drain pan with corrosion resistant coating to drain condensate in cooling and heating operations
• Thermal expansion valve (TXV) for both cooling and heating to optimize performance
• Operates down to as low as 5°F ambient temperature with time-temperature defrost board with selectable defrost
interval times
• High pressure switch protection
• Electric heat with automatic reset limit switch and non-resettable fuse link
• Filter brackets and disposable filter shipped with unit for field installation; no tool needed to replace filter.• Multi-function microprocessor control board
• Make-up air vent when fully opened allows up to 50 CFM of ventilation air to be introduced into the closet
• Unit comes standard with one pull out service switch and one terminal block (only on the 10KW units)
• Units charged with over 4lbs of refrigerant have factory installed leak mitigation sensorsAPPLICATIONS
Hospitality, Apartments/Condominiums, Assisted Living/Memory Care, Student Housing, Senior Living and Modular/
Prefabricated Buildings.